
D1 Iron
pH neutral iron residues remover, decontaminating gel.
Changes colour during the reaction: you can see the effectiveness of the product.
- 500 ml, in stock
- 4,54 L
Step 2 · Exterior
During everyday life the car is subject to lots of dirt and contaminations that interact with the protective layers. They are divided into inorganic (smog, traffic film, tar, rust and ferrous residues, limestone, glues) and organic (mud, plant resins, insects). Innovacar products work through a mechanical, chemical and organic decontamination to prepare the car for the next stages.
Step 2 · Exterior
During everyday life the car is subject to lots of dirt and contaminations that interact with the protective layers. They are divided into inorganic (smog, traffic film, tar, rust and ferrous residues, limestone, glues) and organic (mud, plant resins, insects). Innovacar products work through a mechanical, chemical and organic decontamination to prepare the car for the next stages.

pH neutral iron residues remover, decontaminating gel.
Changes colour during the reaction: you can see the effectiveness of the product.

Limescale remover and decontaminating treatment shampoo.

Specific anti-scale and decontaminating treatment.

Ultra quick iron remover and shampoo in one product.
Thixotropic function: increases density in contact with surfaces and works longer on vertical panels.

Tar, grease and asphalt decontaminating treatment.

Lubricant for safe and fast clay bar and clay mitt decontamination.

Decontaminating clay bar. Grammage: 100 g. Soft, Medium or Forte.

Decontaminating mitt, even more comfortable than the clay bar.

Hard PBT bristles brush. Bristles length: 5.5 cm.
Use a dedicated third bucket to rinse the brush when washing alloy rims.

Tires hard bristles brush. Bristles length: 2.5 cm.
The perfect tool for tire decontamination: use it with 100% Degreasing or SD1 Iron. Inside, it “shakes” the fibers of floor mats and the trunk.
Frequently asked questions
What detailers ask us most often about the range and the 7-step method.
Follow the 7 steps of the method: touchless prewash (SP1), decontamination (D1 for iron, D3 for tar, DS for limescale, clay bar or clay mitt with DL Lube), wash (S2 with two buckets), drying (Micron XXL cloths and H2O Coat), polishing (F1, A1, P1 depending on the marks), protection (SC0/SC1 sealants, SC2/SC5 dressings) and finally the glass (SC3 Glass Sealant).
D1 Iron is a pH-neutral decontaminating gel that changes colour as it reacts with iron residues, for full decontamination. SD1 Iron Thixo Rapid combines iron remover and shampoo in one product, with a thixotropic function that gains density on vertical surfaces, designed for the decontaminating wash of the maintenance cycle.
Yes. Undiluted it is ideal for insects, rims, tires, engine compartment, rubber and plastics. Diluted 1:10 to 1:12 it works on interiors and delicate parts, applied with the Foamer on cloths or brushes.
DL Lube, formulated for safe and fast mechanical decontamination. Lubricate the surface well, work in small areas and choose the clay bar grade (Soft, Medium or Forte) according to the level of contamination; the clay mitt is the more comfortable option for large areas.
Most liquids come in 500 ml or 1000 ml and in 4.54 L for high-volume operations, such as SP1, S2, 100% Degreasing, H2O Coat, W1 and X2. D2 Check and SC2 Dressing also come in 5 L. On this page every size shows whether it is in stock in the store.