F1
F1 Force One
Heavy cut compound: removes the deep marks.
In stockView in store
Step 5 · Exterior
Polishing Innovacar
A particularly tricky phase that requires a deep preliminary decontamination and a precise approach to the removal of swirls and marks.
Already a BestQuímica customer?No account yet? Create one in 2 minutes
Step 5 · Exterior
Polishing
A particularly tricky phase that requires a deep preliminary decontamination and a precise approach to the removal of swirls and marks.
A1A1 All in One
Cut & polish: removes marks and gives definition with high gloss.
In stockView in store
P1P1 Polish Up
Nano ultra finish: for an extra shining result.
In stockView in store
D2D2 Check
Oil/grease remover and halo verifier.
Ideal to check if the surface is free from any kind of dirt before and during polishing.
In stockView in store2 sizes available in the store
Frequently asked questions
Technical questions, short answers
What detailers ask us most often about the range and the 7-step method.
In what order should I use the Innovacar products for a full wash?
Follow the 7 steps of the method: touchless prewash (SP1), decontamination (D1 for iron, D3 for tar, DS for limescale, clay bar or clay mitt with DL Lube), wash (S2 with two buckets), drying (Micron XXL cloths and H2O Coat), polishing (F1, A1, P1 depending on the marks), protection (SC0/SC1 sealants, SC2/SC5 dressings) and finally the glass (SC3 Glass Sealant).
How do I confirm the surface is ready for polishing or sealing?
With D2 Check: it removes oils and greases and reveals halos and residues. Use it before and during polishing and, always, before applying SC3 Glass Sealant or the ceramic coatings.