Skip to content
View in store
H2O Coat
H2OStep 4 · Drying

H2O Coat

Instant hydrophobic booster.

Perfect to optimize drying times.

Already a BestQuímica customer?No account yet? Create one in 2 minutes

Sizes

Request a quote

In the 7-step method

Step 4 · Drying. Next is a careful drying step using very soft microfiber cloths and, if possible, compressed air to remove water from critical points.

Questions about this product

In what order should I use the Innovacar products for a full wash?

Follow the 7 steps of the method: touchless prewash (SP1), decontamination (D1 for iron, D3 for tar, DS for limescale, clay bar or clay mitt with DL Lube), wash (S2 with two buckets), drying (Micron XXL cloths and H2O Coat), polishing (F1, A1, P1 depending on the marks), protection (SC0/SC1 sealants, SC2/SC5 dressings) and finally the glass (SC3 Glass Sealant).

Are the shampoos safe on cars with a sealant or ceramic coating?

S2 Foamy and S2 Foamy Color are pH neutral, with enzymes, and do not strip the applied protection. For maintenance between protections, S1 Wash & Coat washes and boosts the sealant in one pass, and H2O Coat or W1 Quick Detailer at the end of the wash extend the hydrophobic effect.

How do I confirm the surface is ready for polishing or sealing?

With D2 Check: it removes oils and greases and reveals halos and residues. Use it before and during polishing and, always, before applying SC3 Glass Sealant or the ceramic coatings.

Are the Base Coat, Top Coat and Hybrid Coat ceramic coatings sold online?

No. The SiNH line (Base Coat 9H, Top Coat 5H and Hybrid Coat 7H) is reserved for Innovacar authorized centers. If you run a detailing center and want to apply ceramics, request a quote and we will talk about authorization.

Used in the same step

← Back to the range