Skip to content
View in store
Wash Mitt
MITTStep 3 · Wash

Wash Mitt

Washing gloves: Micron (microfiber), Wool (short pile wool) and Wool Long (long pile wool).

Always wash from top to bottom and use 2 different gloves: wool for the top and microfiber for the dirtier bottom.

Already a BestQuímica customer?No account yet? Create one in 2 minutes

Sizes

Request a quote

In the 7-step method

Step 3 · Wash. To complete the washing phase it is necessary to achieve perfectly clean surfaces. Here the foams and detergents remove all dirt particles still present on the body. Always use 2 buckets with grid: one with water and shampoo, one with only water for rinsing.

Questions about this product

In what order should I use the Innovacar products for a full wash?

Follow the 7 steps of the method: touchless prewash (SP1), decontamination (D1 for iron, D3 for tar, DS for limescale, clay bar or clay mitt with DL Lube), wash (S2 with two buckets), drying (Micron XXL cloths and H2O Coat), polishing (F1, A1, P1 depending on the marks), protection (SC0/SC1 sealants, SC2/SC5 dressings) and finally the glass (SC3 Glass Sealant).

How often should I do a deep cleaning?

The recommended cycle for normal use is 1 wash every 10 to 14 days: a deep cleaning (SP1 + D1 + D3 + DS + W1), then three maintenance washes (SP1 + S2), a decontaminating wash (SP1 + SD1 + DS) and three more maintenance washes before repeating the deep cleaning.

What is the difference between D1 Iron and SD1 Iron Thixo Rapid?

D1 Iron is a pH-neutral decontaminating gel that changes colour as it reacts with iron residues, for full decontamination. SD1 Iron Thixo Rapid combines iron remover and shampoo in one product, with a thixotropic function that gains density on vertical surfaces, designed for the decontaminating wash of the maintenance cycle.

Are the shampoos safe on cars with a sealant or ceramic coating?

S2 Foamy and S2 Foamy Color are pH neutral, with enzymes, and do not strip the applied protection. For maintenance between protections, S1 Wash & Coat washes and boosts the sealant in one pass, and H2O Coat or W1 Quick Detailer at the end of the wash extend the hydrophobic effect.

Used in the same step

← Back to the range