
S2 Foamy
pH neutral foamy shampoo with added enzymes.
Step 3 · Exterior
To complete the washing phase it is necessary to achieve perfectly clean surfaces. Here the foams and detergents remove all dirt particles still present on the body. Always use 2 buckets with grid: one with water and shampoo, one with only water for rinsing.
Step 3 · Exterior
To complete the washing phase it is necessary to achieve perfectly clean surfaces. Here the foams and detergents remove all dirt particles still present on the body. Always use 2 buckets with grid: one with water and shampoo, one with only water for rinsing.

pH neutral foamy shampoo with added enzymes.

pH neutral colored foamy shampoo with added enzymes. Pink, green or blue.

All-in-one shampoo with added enzymes acting as a protective sealant.

pH neutral shampoo with added probiotics for rinseless washes.

pH neutral shampoo with added probiotics and protection for rinseless washes.

Lubricated detailer with added probiotics for fast rinseless cleaning and polishing treatment.

Washing gloves: Micron (microfiber), Wool (short pile wool) and Wool Long (long pile wool).
Always wash from top to bottom and use 2 different gloves: wool for the top and microfiber for the dirtier bottom.

Bucket with grid, lid and stickers. Capacity: 20 L.

Medium bristles brush. Bristles length: 5.1 cm.
Very useful for details such as badges, grids and moldings.
Frequently asked questions
What detailers ask us most often about the range and the 7-step method.
Follow the 7 steps of the method: touchless prewash (SP1), decontamination (D1 for iron, D3 for tar, DS for limescale, clay bar or clay mitt with DL Lube), wash (S2 with two buckets), drying (Micron XXL cloths and H2O Coat), polishing (F1, A1, P1 depending on the marks), protection (SC0/SC1 sealants, SC2/SC5 dressings) and finally the glass (SC3 Glass Sealant).
The recommended cycle for normal use is 1 wash every 10 to 14 days: a deep cleaning (SP1 + D1 + D3 + DS + W1), then three maintenance washes (SP1 + S2), a decontaminating wash (SP1 + SD1 + DS) and three more maintenance washes before repeating the deep cleaning.
D1 Iron is a pH-neutral decontaminating gel that changes colour as it reacts with iron residues, for full decontamination. SD1 Iron Thixo Rapid combines iron remover and shampoo in one product, with a thixotropic function that gains density on vertical surfaces, designed for the decontaminating wash of the maintenance cycle.
S2 Foamy and S2 Foamy Color are pH neutral, with enzymes, and do not strip the applied protection. For maintenance between protections, S1 Wash & Coat washes and boosts the sealant in one pass, and H2O Coat or W1 Quick Detailer at the end of the wash extend the hydrophobic effect.